byp4a55 professor6T9

Linux ded7073.inmotionhosting.com 4.18.0-553.72.1.el8_10.x86_64 #1 SMP Tue Sep 2 06:07:48 EDT 2025 x86_64
Apache
209.182.213.109

File Name : CONTRIBUTING.md

# HOW TO CONTRIBUTE

Thank you for considering contributing to this distribution.  This file
contains instructions that will help you work with the source code.

The distribution is managed with [Dist::Zilla](https://metacpan.org/pod/Dist::Zilla).
This means that many of the usual files you might expect are not in the
repository, but are generated at release time.  Some generated files are kept
in the repository as a convenience (e.g. Build.PL/Makefile.PL and META.json).

Generally, **you do not need Dist::Zilla to contribute patches**.  You may need
Dist::Zilla to create a tarball.  See below for guidance.

## Getting dependencies

If you have App::cpanminus 1.6 or later installed, you can use
[cpanm](https://metacpan.org/pod/cpanm) to satisfy dependencies like this:

$ cpanm --installdeps --with-develop .

You can also run this command (or any other cpanm command) without installing
App::cpanminus first, using the fatpacked `cpanm` script via curl or wget:

$ curl -L https://cpanmin.us | perl - --installdeps --with-develop .
    $ wget -qO - https://cpanmin.us | perl - --installdeps --with-develop .

Otherwise, look for either a `cpanfile` or `META.json` file for a list of
dependencies to satisfy.

## Running tests

You can run tests directly using the `prove` tool:

$ prove -l
    $ prove -lv t/some_test_file.t

## Code style and tidying

This distribution contains a `.perltidyrc` file in the root of the repository.
Please install Perl::Tidy and use `perltidy` before submitting patches. However,
as this is an old distribution and styling has changed somewhat over the years,
please keep your tidying constrained to the portion of code or function in which
you're patching.

$ perltidy lib/HTTP/Status.pm -o my_tidy_copy.pm

The above command, for example, would provide you with a copy of `Status.pm`
that has been cleaned according to our `.perltidyrc` settings. You'd then look
at the newly created `my_tidy_copy.pm` in the dist root and replace your work
with the cleaned up copy if there are differences.

This may seem like an arbitrary thing, but it is immensely helpful if all code
is written in a singular style. If everything were tidy, it'd look like one
single person wrote the code rather than a mish-mash.

## Installing and using Dist::Zilla

[Dist::Zilla](https://metacpan.org/pod/Dist::Zilla) is a very powerful
authoring tool, optimized for maintaining a large number of distributions with
a high degree of automation, but it has a large dependency chain, a bit of a
learning curve and requires a number of author-specific plugins.

To install it from CPAN, I recommend one of the following approaches for the
quickest installation:

# using CPAN.pm, but bypassing non-functional pod tests
    $ cpan TAP::Harness::Restricted
    $ PERL_MM_USE_DEFAULT=1 HARNESS_CLASS=TAP::Harness::Restricted cpan Dist::Zilla

# using cpanm, bypassing *all* tests
    $ cpanm -n Dist::Zilla

In either case, it's probably going to take about 10 minutes.  Go for a walk,
go get a cup of your favorite beverage, take a bathroom break, or whatever.
When you get back, Dist::Zilla should be ready for you.

Then you need to install any plugins specific to this distribution:

$ dzil authordeps --missing | cpanm

You can use Dist::Zilla to install the distribution's dependencies if you
haven't already installed them with cpanm:

$ dzil listdeps --missing --develop | cpanm

Once everything is installed, here are some dzil commands you might try:

$ dzil build
    $ dzil test
    $ dzil regenerate

You can learn more about Dist::Zilla at http://dzil.org/

## Other notes

This distribution maintains the generated `META.json` and either `Makefile.PL`
or `Build.PL` in the repository. This allows two things:
[Travis CI](https://travis-ci.org/) can build and test the distribution without
requiring Dist::Zilla, and the distribution can be installed directly from
Github or a local git repository using `cpanm` for testing (again, not
requiring Dist::Zilla).

$ cpanm git://github.com/Author/Distribution-Name.git
    $ cd Distribution-Name; cpanm .

Contributions are preferred in the form of a Github pull request. See
[Using pull requests](https://help.github.com/articles/using-pull-requests/)
for further information. You can use the Github issue tracker to report issues
without an accompanying patch.

# CREDITS

This file was adapted from an initial `CONTRIBUTING.mkdn` file from David
Golden under the terms of the [CC0](https://creativecommons.org/share-your-work/public-domain/cc0/), with inspiration from the
contributing documents from [Dist::Zilla::Plugin::Author::KENTNL::CONTRIBUTING](https://metacpan.org/pod/Dist::Zilla::Plugin::Author::KENTNL::CONTRIBUTING)
and [Dist::Zilla::PluginBundle::Author::ETHER](https://metacpan.org/pod/Dist::Zilla::PluginBundle::Author::ETHER).

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2025-03-11 03:11:54
..	dir	-	root/root	0755	2026-02-06 04:50:38
CONTRIBUTING.md	text/plain	4.75 KB	root/root	0644	2018-06-05 04:29:24
Changes	text/plain	4.93 KB	root/root	0644	2018-06-05 04:29:24
README.md	text/plain	11.19 KB	root/root	0644	2018-06-05 04:29:24

Team Anon Force

https://t.me/Professor6T9x